Installation Manual

22
Assembly of Power Supply Bracket and Mounting Power Supply
1. Insert screw into
hole on flat side of
Power Supply
Bracket
2. Start screw into
clamp
Note: Use Part Numbers:
P/N 800-0255 clamp
P/N 812-0067 screw
Note: Notch of clamp
should be to the inside
towards power supply
bracket.
3. Mount Power
Supply onto bracket
using four bolts.
Note: Power Supply
connector should be
facing towards beveled
end of power supply
bracket.
Note: Use Part Numbers:
P/N 816-0006 bolts
P/N JDGT-0002 Power
Supply
P/N 440-0600 electrical
P/N 440-0660 gas
P/N 800-0267 bracket