User's Manual

54
English English
- Use the volume buttons on the Stereo Headset to adjust volume.
3 Pairing
4 Volume Control
- Press and hold the pairing button on the Stereo Headset for 6 seconds until the blue and
red LEDs flash alternately. This device name is set to be “Bluetooth Stereo Headset”.
If you are asked to enter pin-code during pairing, please enter 1234.
(Note: The “1234” is default pin-code pre-stored in this Stereo Headset.)
from “Use with mobile phone”
Use with mobile phone
1 Pairing
2 To make a call
Press and hold the pairing button on the Stereo Headset for 6 seconds to set the Stereo
Headset into pairing mode. The blue and red LEDs will be flashing when the Stereo
Headset is in pairing mode. To properly perform pairing procedure on your mobile phone,
please refer to the user manual of your mobile phone for its own pairing instruction. This
device name is set to be “Bluetooth Stereo Headset”. If you are asked to enter pin-code
during pairing, please enter 1234.
(Note: The “1234” is default pin-code pre-stored in this
Stereo Headset.)
- Dial out the number from your mobile phone.
- Voice is automatically transferred to the headset.
4 To reject a Call
- Press the reject button on the mobile phone to reject a call.
3 To receive a Call:
1. When there is an incoming call, press the answer button to answer the call and the audio
channel will be switched to the mobile phone.
2. Press the Volume control button to adjust the volume.
3. When finish talking, press the answer button to end the call and the audio channel will be
switched back to the audio device.
Note:
To have music streaming, make sure your mobile phone supports Bluetooth Stereo
functions
6 sec.
Vol+Vol-