Owner's Manual

ManualsBrandsPhoenix ManualsLGR DehumidifierPHOENIX DryMAX XL - XL LGR Dehumidifier

USEPHOENIX.COM

1.800.533.7533

Installation, Operation & Service Instructions

– READ AND SAVE THESE INSTRUCTIONS –

The Phoenix DryMAX XL LGR Dehumidiﬁer

• Two in the space of one regular XL

• XL LGR Performance - 125 PPD

• Built In Bluetooth

• Free DryLINK App

• Graphical Control Panel

• Patented FiveCOIL Design

• Wheels and a Handle

• Cord Storage

• Maneuverability

• Superior Stacking

• Size = 24” x 16” x 17.5”

• Easily Serviceable

Speciﬁcations subject to change without notice.

The groundbreaking DryMAX XL removes an amazing 125

ppd at AHAM while taking up only 50% of the space of the

next smallest competitive XL dehumidiﬁer. Because of its

compact size, the DryMAX XL allows restorers to ﬁt twice the

amount of XL dehumidiﬁers on their vehicle.The DryMAX XL

is also the ﬁrst dehumidiﬁer with built-in Bluetooth technology

and the ﬁrst with an advanced graphical control panel

which puts all the information on homescreen in an easily

understandable format. Our free DryLINK app is included with

the unit upon purchase. This unit will automatically send the

psychrometric data by Bluetooth to the DryLINK app or an app

you may already use for your drying jobs. 

Like our industry-leading DryMAX and AirMAX, the new

Phoenix DryMAX XL was also designed with superior stacking

features and easy service access. Our patented FiveCOIL

design, which includes our micro-channel condenser, allows

the featherweight DryMAX XL to pack a knock-out punch

ondrying performance every time.

TS-1031

04/22 Rev. E

Phoenix DryMAX XL

Part No. 4037000 (Red)

4037060 (Blue)

US Patent 10,168,058

1.800.533.7533

Phoenix DryMAX XL - XL LGR Dehumidiﬁer

OWNER’S MANUAL

4201 LIEN RD. • MADISON, WI 53704

Summary of content (16 pages)

PAGE 1
4201 LIEN RD. • MADISON, WI 53704 Phoenix DryMAX XL - XL LGR Dehumidifier OWNER’S MANUAL Installation, Operation & Service Instructions – READ AND SAVE THESE INSTRUCTIONS – The groundbreaking DryMAX XL removes an amazing 125 ppd at AHAM while taking up only 50% of the space of the next smallest competitive XL dehumidifier. Because of its compact size, the DryMAX XL allows restorers to fit twice the amount of XL dehumidifiers on their vehicle.
PAGE 2
Table of Contents Introduction ...............................................................................1 1. Safety Certifications .........................................................2 2. Specifications ....................................................................2 3. Operation ............................................................................2 3.1 Transporting ................................................................2 3.2 Electrical Requirements ..........................
PAGE 3
.2 Electrical Requirements Light Bar = Pulsing The Phoenix DryMAX XL plugs into a common grounded outlet on a 15 amp circuit. It draws 7.7 amps at 80°F, 60% RH. If used in a wet area, a ground fault interrupter (GFI) is required. If an extension cord is required, it must have a minimum of 14 gauge conductors if 25 feet long or less and 12 gauge conductors if greater than 25 feet long. 3.
PAGE 4
3.3.4 PURGE Button During normal operation the pump automatically cycles when the reservoir is full. The display will also communicate to the user that the machine is auto purging in the fourth line of the dashboard and show a 20 second countdown timer. Press the button to remove condensate manually from the reservoir. 3.3.8 Condensate Removal The Phoenix DryMAX XL is equipped with an internal condensate pump to remove the water that is condensed during dehumidification.
PAGE 5
3.3.11 Shut Down Sequence/Power Down time 3.3.13 Job Hours Press the Set button to adjust the Power Down Time in one minute increments ranging from 3 – 20 minutes. The Power Down Time allows the blower to run to remove water from the coil and to allow the evaporator to acclimate to the ambient conditions. At the end of the shutdown time the unit will automatically purge to remove any remaining water. The proper shutdown is dependent on conditions.
PAGE 6
3.3.17 Bluetooth 3.3.20 Humidistat Mode The Bluetooth functionality comes from the factory set to “On”. In the on position the DryMAX XL is capable of transmitting data and receiving commands using the Phoenix DryLINK app or other compatible apps. For further information see the DryLINK Quick Start Guide or use the QR code to go to our website. The default mode is Humidistat “Off” Press the Set button to toggle the Humidistat Mode On/Off. QR Code to take you to the DryLINK web page. 3.3.
PAGE 7
4.2 Storage and Freeze Protection 3.3.23 About The about screen provides the following information: VIHW: Part Number for the Display Board VIFW: Firmware Version on the Display Board PWHW: Part Number for the Power Board PWFW: Firmware Version on the Power Board UUID: The unique identifier for the Bluetooth Radio There are two issues to consider when the Phoenix DryMAX XL is stored between uses and both pertain to water trapped in the unit.
PAGE 8
5.1 Running Diagnostics 5.1.5 Diagnostic Mode - Compressor 5.1.1 Diagnostic Mode Contact Phoenix Tech Support for help with Diagnostic Mode - 800.533.7533. Diagnostics mode is used by our technical support team to help diagnose problems Press the Set button to toggle the Compressor On/Off. Press the Next button to advance to the next screen. 5.1.6 Diagnostic Mode - Display Test Press the Next button for 3 seconds to enter Diagnostic Mode.
PAGE 9
Once the 20 minute countdown timer has expired, the display will automatically advance to show the refrigeration test results. The display will communicate to the user either “Refrig. test passed” or “Refrig. test failed”. the incoming air and evaporates. The evaporator operates in a flooded condition, which means that all the evaporator tubes contain liquid refrigerant during normal operation.
PAGE 10
No dehumidification, air mover runs but compressor does not. 1. Bad connection in compressor circuit 2. Safety float switch closed, check pump reservoir 3. Defective compressor capacitor 4. Defective compressor overload 5. Defective compressor 6. Defective control board 5.3.1 Air Mover Air mover does not run. Compressor runs briefly but cycles on and off. 1. Loose connection in blower circuit 2. Obstruction prevents impeller rotation 3.
PAGE 11
4. Remove the condensate hose and the three screws (T27 Torx) attaching the pump bracket to the bottom housing . Swing connection bracket to the right and out of your way as pictured below 5.3.3 Condensate Pump The internal condensate pump removes water that collects in the reservoir. To replace the condensate pump: 1. Unplug the unit 2. Remove the top housing (3/8” driver) 5. Pull on the white pump cover to remove the pump assembly 6. Remove the screws on the pump bracket (T20 Torx) 3.
PAGE 12
5.3.4 Float Switch The float safety switch activates the pump when the water rises too high in the condensate reservoir. The float switch also turns off the compressor until the water level lowers and disengages the switch. ***IMPORTANT*** - If the float switch is stuck in the up position for more than 60 seconds, a reservoir full error will occur. The possible causes of this error are as follows: • Broken pump • Blockage on hose • Mechanical binding of the float switch To replace the float switch: 1.
PAGE 13
7 Wiring Diagram DISPLAY BOARD PROG SERIAL FLOAT SWITCH BLACK (CORD) RH • 5• 6• 4 • 8• 9• LINE + • 2• 3• 7 RED-5 WHT-12 NEU LINE FLOAT EVAP THERMISTOR PROBE POWER BOARD SERIAL PROG 1 WHITE (CORD) EXHAUST COMPRESSOR CAPACITOR BRN-6 BRN-5 RED-4 RED-3 BLK-2 WHT-1 TEMP/RH SENSOR THERMISTOR COMPRESSOR YEL-7 RED-3 RED-4 BRN-5 24VDC BRN-6 POWER GRN-7 SUPPLY BLK-6 RED-5 ORG-2 WHT-1 BLK-2 • 2• 3• 1 • 5• 6• 4 1 WHT-3 • 8• 9• 7 2 GRN-4 RED-9 BLU-8 WHT-10 YEL-11 3 1 2 3 4 BLK WHT GRN PUM
PAGE 14
8 Service Parts                    -       —           —      -         -           -    
PAGE 15
This page intentionally left blank 1.800.533.7533 USEPHOENIX.
PAGE 16
4201 LIEN RD. • MADISON, WI 53704 Phoenix DryMAX XL - XL LGR Dehumidifier LIMITED WARRANTY Warrantor: Therma-Stor LLC 4201 Lien Rd. Madison, WI 53704 Telephone: 1-800-533-7533 Who Is Covered: This warranty extends only to the original end-user of the Phoenix DryMAX XL dehumidifier and may not be assigned or transferred.