User manual

Configuration and Diagnostics
7278_en_01 PHOENIX CONTACT 3-15
"Change Password" Menu
This option can be used to specify the current password and then enter a new, unique
password. By default upon delivery, the password is "private" (please note that it is case-
sensitive). For security reasons, the input fields do not display your password, but instead
"*******" is displayed.
Figure 3-19 "Change Password" web page
"User Interfaces" Menu
The following actions can be executed here:
– Activation/deactivation of the web server.
– Activation/deactivation of the SNMP agent.
– Activation/deactivation of the configuration pages for redundancy.
Figure 3-20 "User Interfaces" web page
The password must be between four and twelve characters long. Please note that the
password is always transmitted via the network in unencrypted format.
Forgotten your password?
Call the Phoenix Contact phone number listed in the Appendix, making sure you have
the device serial number and MAC address to hand.
With the activation/deactivation of the configuration pages under "User Interfaces", only
the web pages for configuring the selected functions are enabled/disabled in the WBM
menu.