User manual

FL SWITCH LM
3-18
PHOENIX CONTACT 7278_en_01
3.2.4.1 Switch Station
Reboot To trigger a reboot via the web interface, enter a valid password. Save the configuration
beforehand, so that configuration modifications are retained or can be activated via a
restart.
"Ports" Menu
Port Table Overview of all available ports. Clicking on the relevant port number opens a port-specific
page ("Port Configuration").
Figure 3-24 "Port Table" web page
"Port Configuration Table" Menu (only Fl Switch LM ...)
This menu provides an overview of the important configuration settings for all ports and
also provides the option to set the status, transmission mode, and link monitoring function
for all existing ports.
Configuration using a configuration file is used when replacing devices. To duplicate
devices using a configuration file, observe the following:
– Establish a point-to-point connection between an LMS and the management station.
– Load the configuration file to the LMS.
– Reset the LMS.
– Adjust the IP parameters.
– Save the configuration ("Save current configuration" function).
The duplicated switch can now be operated in the network using the adjusted IP
parameters.