User manual

Configuration and Diagnostics
7278_en_01 PHOENIX CONTACT 3-21
"Ports/Port Mirroring" Menu
Activation/deactivation and setting of port mirroring. Port mirroring is used to passively
read incoming or outgoing data that is being transmitted via the selected ports. To do this
a measuring instrument (PC) is connected to the destination port, which records the data,
yet must not itself be activated.
Figure 3-28 "Port Mirroring" web page
"Display" Menu
Here, you can find some status information about the swicth.
Figure 3-29 Menü „Display“
If ports are set with the same value, port mirroring will be disabled. The source port is set
to "0".
The port capacity is calculated according to the set transmission parameters. Example:
A source port is operated at 100 Mbps and reaches a capacity of 5%. The destination
port is operated at 10 Mbps. Therefore, with the same volume of data the destination port
reaches a capacity of 50%.