User manual

Configuration and Diagnostics
7278_en_01 PHOENIX CONTACT 3-41
Description Contains the duplex mode of the selected port:
Automatic 1
Manual 2
flWorkNetPortName
OID 1.3.6.1.4.1.4346.11.11.4.2.2.1.6
Syntax Octet string (0 - 16)
Access Read/write
Description Contains the "name" of the port, e.g., "Robot 1".
flWorkNetPortEnable
OID 1.3.6.1.4.1.4346.11.11.4.2.2.1.7
Syntax Integer
Access Read/write
Description Here you can disable the port:
Port disabled 1
Port enabled 2
flWorkNetPortLinkMonitoring
OID 1.3.6.1.4.1.4346.11.11.4.2.2.1.8
Syntax Integer
Access Read/write
Description This object can be used to enable link monitoring (message via display and alarm contact) for
the relevant port:
Link monitoring enabled 2
Link monitoring disabled 1
flWorkNetPortModus
OID 1.3.6.1.4.1.4346.11.11.4.2.2.1.9
Syntax Integer32 (0 - 1024)
Access Read/write
Description This object can be used to set the transmission mode for the relevant port:
Auto negotiation 1
10 Mbps half duplex 2
10 Mbps full duplex 3
100 Mbps half duplex 4
100 Mbps full duplex 5
flWorkNetPortIfIndex
OID 1.3.6.1.4.1.4346.11.11.4.2.2.1.11
Syntax Integer32 (0 - 1024)
Glass fiber FX ports only support operation at 100 Mbps full duplex (5).
The auto crossing function is only active when auto negotiation is enabled. If the
transmission speed or transmission mode is set to a fixed value, the auto
crossing function is disabled.