User manual

Configuration and Diagnostics
7278_en_01 PHOENIX CONTACT 3-49
OID 1.3.6.1.4.1.4346.11.11.11.2.5
flWorkFWCtrlConfStatus
flWorkFWCtrlConfSave
flWorkFWCtrlDefaultUponDelivery
flWorkFWCtrlSerial
OID 1.3.6.1.4.1.4346.11.11.11.2.6
flWorkFWCtrlSerialBaud
OID 1.3.6.1.4.1.4346.11.11.11.2.5.1
Syntax Integer
Access Read
Description This object can be used to request the status of the active device configuration:
Configuration OK 1
Configuration faulty 2
Configuration saved 3
Saving configuration 4
OID 1.3.6.1.4.1.4346.11.11.11.2.5.2
Syntax Integer
Access Read/write
Description This object can be used to save the device configuration:
Do not save configuration 1
Save configuration 2
OID 1.3.6.1.4.1.4346.11.11.11.2.5.3
Syntax Integer
Access Read/write
Description This object can be used to set the device to the default settings (basic settings - see 2.1.1 on
page 2-1). It also triggers a restart:
Do not reset to default settings 1
Reset to default settings 2
OID 1.3.6.1.4.1.4346.11.11.11.2.6.1
Syntax Integer
Access Read
Description This object can be used to request the set data transmission rate of the serial interface:
2400 baud 1
9600 baud 2
19200 baud 3
38400 baud 4
57600 Baud 5
115200 Baud 6