User manual

Configuration and Diagnostics
7278_en_01 PHOENIX CONTACT 3-51
flSwitchCtrlSpanTree
flSwitchCtrlRedundancy
flSwitchCtrlMacTableErase
flSwitchIgmpTableErase
OID 1.3.6.1.4.1.4346.11.11.15.1.1
Syntax Integer
Access Read/write
Description Activates/deactivates STP for the switch.
RSTP deactivated 1
RSTP activated 2
To enable RSTP activation, the "flSwitchCtrlRedundancy" object must be set to
RSTP.
OID 1.3.6.1.4.1.4346.11.11.15.1.2
Syntax Integer
Access Read/write
Description Displays the selected redundancy mechanisms for the switch. If "No redundancy" is selected,
all redundancy mechanisms and the corresponding web pages are disabled.
No redundancy 1
RSTP activated 2
For RSTP configuration, the Bridge_MIB is used, see page 3-32.
OID 1.3.6.1.4.1.4346.11.11.15.1.11
Syntax Integer
Access Read/write
Description This object is used to control the Unicast clear function. Upon being set to a value of “2” the
Unicast table will immediately clear all of its entries. The switch will then resume learning
addresses normally and rebuilding the Unicast table. The value of the OID will revert back to
“1”.
Default 1
Clear Unicast table 2
OID 1.3.6.1.4.1.4346.11.11.15.3.3
Syntax Integer
Access Read/write
Description This object is used to control the Multicast clear function. Upon being set to a value of “2” the
Unicast table will immediately clear all of its entries. The switch will then resume learning
addresses normally and rebuilding the Multicast table. The value of the OID will revert back
to “1”.
Default 1
Clear Multicast table 2