User manual

Configuration and Diagnostics
7278_en_01 PHOENIX CONTACT 3-55
Resetting to Default Settings
Figure 3-38 Resetting to default settings
This screen can be used to reset the switch to the settings default upon delivery or to
restart it. This screen can be opened by first setting the "Reset Switch" option or the "Reset
Switch to factory defaults" option in the "Basic Switch Configuration" screen, and then
selecting "Apply" or "Save". This undoes any changes to the configuration, and resets all
IP parameters to the settings default upon delivery (see Section 2.1.1 on page 2-1).
Resetting to the default settings also resets the password to "private". For security
reasons, we recommend you enter a new, unique password.
Reset Switch Warning
Warning:
Resetting the switch will cause all connectivity to the
switch to be lost until the switch has rebooted.
If you select reset to "factory default", all configuration
information will be reset to its factory default settings.
Confirm Reset: <No >
PREV MENU APPLY
Push Space Bar to select `yes` and reset the switch
70560023