User manual

Configuration and Diagnostics
7278_en_01 PHOENIX CONTACT 3-57
Press "a" to download the new software. The following message appears:
Figure 3-41 XMODEM ready
The switch is now ready for the new firmware. In HyperTerminal, select "Send File" from
the "Transmission" menu.
Figure 3-42 Xmodem - Send File option
Make sure that the protocol is set to "Xmodem", otherwise the transmission will fail.
--->Phoenix Contact Lean Managed Switch<---
Phoenix Contact GmbH & Co. KG
www.phoenixcontact.com
ENTER ´a´ TO DOWNLOAD SWITCH SOFTWARE USING XMODEM PROTOCOL
ENTER ´c´ TO CONTINUE BOOTING
PxC LMS systemprompt> a
Downloading firmware image with XMODEM over serial port ...
XMODEM Receive: Waiting for Sender ...
-_
72780006