User manual

Lean Managed Switch
7278_en_01 PHOENIX CONTACT 1-1
1 Lean Managed Switch
1.1 Properties
The Lean Managed Switch (LMS) is an Ethernet switch, which is suitable for industrial use.
The LMS has eight or six ports, but with three versions available:
– FL SWITCH LM 8TX(-E) with eight RJ45 ports
– FL SWITCH LM 4TX/2FX(-E) with four RJ45 ports and two FX ports (multi-mode)
– FL SWITCH LM 4TX/2FX SM(-E) with four RJ45 ports and two FX ports (single mode)
Figure 1-1 Versions of the Lean Managed Switch
Future-Proof Networks for the Highest Possible Requirements
Maximum availability Maximum Network Availability
A device design that does not use a fan, the redundant power supply, and conformance
with all relevant industrial standards in terms of EMC, climate, mechanical load, etc. ensure
the highest possible level of availability.
Redundancy can also be created with standards: the Rapid Spanning Tree Protocol
ensures the safe operation of the entire network regardless of topology, even in the event
of a cable interrupt.
All information Clear Information
Two LEDs per port ensure that you always have sufficient local information. A web server
and an SNMP agent are provided for diagnostics, maintenance, and configuration via the
network. A terminal access point can be used for local operation.