Operator's Manual

-14-
$8;23(5$7,1*02'(,1287),*
Select the AUX operating mode using the
02'(EXWWRQ
Remove the rubber cover from the AUX IN
connector and connect the external music
VRXUFH03SOD\HURUVLPLODUXVLQJWKH
included AUX cable. Switch on the external
music source and start the playback.
Set the volume with the regulator for the
external music source or the volume knob of the
unit.
An external speaker or headphones can be
connected to the AUX OUT connector. Switch
on the unit and audio will be output to the
external speaker or headphones. You can also
EULHÁ\SUHVVWKHPXWHEXWWRQ
to mute the
sound
NOTE:
–
Batteries of the connected devices cannot be
charged via the AUX connection.
–
When the unit is switched off, the connected
devices are not switched off.
–
After using AUX or USB connectors, replace
the rubber covers to protect the connectors
against dust, dirt or moisture.
CHARGING EXTERNAL DEVICES VIA THE
86%3257),*
Insert the USB plug of the device to be charged
into the USB port of the unit.
The USB power output port is a connection port
for powering low power devices such as cellular
SKRQHV03SOD\HUVHWF
Immediately disconnect the USB device after
charging.
NOTE:
–
No music playback available via USB
connection.
–
After using the USB port, replace the rubber
cover to protect the port against dust, dirt or
moisture.
Fig. 11
Fig. 12