User's Guide
36
14.1 Enter ight mode
To disable the wireless function and enter ight mode in
each hearing aid:
1. If the hearing aid is turned o, proceed
to Step 2.
If the hearing aid is on turn it o by
pressing and holding the lower part of
the button for 3 seconds, until the
indicator light turns solid red for
2 seconds, signifying that the hearing
aid is switching o.
2.
Press and hold the lower part of the
button. The green indicator light blinks
when the hearing aid starts up.
3.
Keep pressing the button for 7 seconds,
until the indicator light is solid orange,
then release the button.
The solid orange light indicates the
hearing aid is in ight mode.
In ight mode, your hearing aid cannot connect directly
to your phone.