User's Manual

18 19
3. Getting started
Step 6. Turn on your Roger microphone
Step 7. Switch your hearing aids to the T-Coil program
It may be necessary to contact your hearing care
professional to enable the T-Coil program in your
hearing aids.
Step 8. Connect Roger MyLink to your Roger microphone
Hold Roger MyLink within 10 cm / 4 inches of your
Roger microphone and press Connect on the Roger
microphone.
Step 8 is only required the first time you use
Roger MyLink. Roger MyLink will then remain
connected with your microphone even after
Roger MyLink has been rebooted.
Ready!