User's Manual

52
Most probable cause Remedy
쐍 The surrounding noise may
be too loud.
ComPilot II is unresponsive or there are no light indicators when
switching On.
쐍 ComPilot II may be completely
discharged.
쐍 It may indicate a software
problem.
The operating time of your ComPilot II is reduced substantially.
쐍 The battery typically needs
several charging cycles to
achieve full performance.
Please consult the datasheet
for the typical operating
time for your ComPilot II.
쐍 Although ComPilot II features
noise reduction technologies,
very noisy environments
should be avoided.
쐍 Suggest to your callers that
they increase the phone
volume.
쐍 Charge your ComPilot II for
at least 1 hour.
쐍 Unplug any connectors from
ComPilot II.
쐍 Switch ComPilot II O and
On again.
쐍 Consider resetting ComPilot II.
쐍 Charge for at least 3 hours
the rst time you charge
ComPilot II.
쐍 Let a new ComPilot II
discharge completely three
times.
9. Troubleshooting