Phonak TVLink II User Guide
Contents 1. Welcome 5 2. Getting to know your TVLink II 6 3. Getting started 9 3.1 Setting up the power supply 9 3.2 Selecting the charging slot 10 3.3 Connecting the cables 11 3.4 Charging the streamer 19 3.5 Pairing TVLink II and the streamer 20 4. Daily use 24 4.1 Wearing the streamer 24 4.2 Connecting the devices 25 4.3 Adjusting the volume 28 4.4 Streaming pause and resume 30 31 4.6 Switching off devices 32 4.7 Understanding the indicator light 33 2 4.
5. Troubleshooting 34 5.1 Testing the audio transmission 34 5.2 Questions and answers 37 6. Service and warranty 40 6.1 Local warranty 40 6.2 International warranty 40 6.3 Warranty limitation 41 7. Compliance information 42 8. Information and explanation of symbols 46 9. Important safety information 50 10.
I will use the TVLink II along with the following streamer: c ComPilot c ComPilot II c ComPilot Air II
1. Welcome Congratulations on choosing the Phonak TVLink II. It expands the way you hear your world by wirelessly connecting your hearing aids to your TV and other entertainment or communication devices. Please read this user guide carefully to discover how to benefit from all the features of your TVLink II. If you have any questions, please consult your hearing care professional or go to www.phonak-us.com/tvlink Phonak – life is on www.phonak-us.
2. Getting to know your TVLink II The intended use of the TVLink II basestation is to connect your hearing aids to a TV (or any other audio source). It sends audio signals wirelessly to the hearing aids up to 30 meters (100 ft). It also serves as a charging cradle for the Phonak streamer. The system consists of three main elements: Your hearing aids, a Phonak streamer and the TVLink II basestation (“TVLink II”).
Hearing aid ComPilot Air II * Up to 30 meters (100 ft) TVLink II basestation * ComPilot or ComPilot II are also compatible The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Phonak is under license.
2. Getting to know your TVLink II 2.1 Device description Buttons A Volume down B Power on/off and main indicator light C Volume up D Pairing C B A D E Inputs E Power supply F Digital audio (optical) G Digital audio (coaxial) H Analog audio (3.
3. Getting started 3.1 Setting up the power supply Select the adapter that corresponds to your country. US UK AUS EU J Firstly, insert the top round end of the adapter into the round corner of the power supply. J Click the bottom end of the adapter in to lock it into place. 1. 2. J To remove, first pull back the tab on the power supply. J Pull the adapter upwards to remove it. 1. 2.
3. Getting started 3.2 Selecting the charging slot The stand-alone TVLink II is delivered with the charging slot for Phonak ComPilot Air II clip-on streamer. If you have ComPilot or ComPilot II, change the slot using a Phillips head screwdriver no 1. J Unscrew the bottom screw. Lift the charging slot as shown. J Insert the other slot completely. Insert and gently tighten the screw.
3.3 Connecting the cables Connect the power supply: J Place TVLink II next to your TV or sound source. Connect the mini-USB plug of the power supply to the power input of the TVLink II. Plug the power supply into a wall socket.
3. Getting started Supported audio formats The Phonak TVLink II can be connected to any audio source such as a TV or computer. It supports 3 different audio input formats. Optical (“Toslink”) Digital signal Fiber optic cable Coaxial Digital signal RCA cable Analog Analog signal 3.5 mm plug For best results, we recommend to use the optical or coaxial connection if available on your audio device. Please ensure to always connect TVLink II to the audio output of the audio source.
Signal priorities Typically only one audio cable is connected. If more than one cable is connected and a signal is present, TVLink II automatically selects the best possible input in the following order: 1 B 3 1. Optical 2. Coaxial 3. Analog Even if the optical and coaxial cable are a singlewire, the signal is in stereo.
3. Getting started Option 1: Connecting via Optical cable If an optical output is available: J Unpack the cable labeled “Optical”. J Remove the protection caps from the plugs. J Connect one end of the optical cable into the “Optical” input of TVLink II, and the other end into the optical output of your TV. Now proceed with the charging of the streamer on page 19.
Option 2: Connecting via coaxial cable If a coaxial output is available: J Unpack the cable labeled “Coaxial” (orange plugs). J Connect one end of the coaxial cable into the “Coaxial” input of TVLink II, and the other end into the coaxial (also known as “digital out”, “S/P DIF”) output of your TV. Now proceed with the charging of the streamer on page 19.
3. Getting started Option 3: Connecting via RCA / Cinch cable If an RCA output (red / white) is available: J Unpack the cable labeled “Analog RCA / Cinch”. J Connect the 3.5 mm plug into the “Analog” input of the TVLink II. Connect the red and white plugs to the matching red and white output sockets on your TV. Now proceed with the charging of the streamer on page 19.
Option 4: Connecting to the headset socket J Unpack the cable labeled “Analog 3.5 mm”. J Connect the stereo plug into the “Analog” input of the TVLink II. Plug the other end into the headset output socket of your TV.
3. Getting started When connecting TVLink II to the headset socket of your TV, you are able to adjust the volume via your TV remote control. Some TVs will switch off their loudspeakers when using the headset socket – the TV will not be audible for other people.
3.4 Charging the streamer When using your streamer for the first time, charge it for at least three hours. To charge the streamer: J Ensure the charging slot fits the Phonak streamer (see chapter 3.2). J Insert the streamer gently into the charging slot of TVLink II. Ensure the integrated plug is placed in the streamer charging socket correctly. ComPilot Air II ComPilot, ComPilot II Charging is complete when the streamer’s indicator light turns solid green.
3. Getting started The TVLink II can either be on or off during charging. Its main indicator light does not show the charging process. The typical time to fully charge the streamer is 90 minutes. We recommend that the streamer is switched off while charging. 3.5 Pairing TVLink II and the streamer If you have received the TVLink II and the Phonak streamer together in a complete set, they are paired already and you may move on to page 24.
Put the streamer into pairing mode Either ComPilot Air II: J Switch on while pressing the volume up button at the same time. 2. 1. Or ComPilot II: J Switch on first. Press the connect and volume up buttons at the same time for 2 sec.
3. Getting started Put TVLink II into pairing mode If TVLink II has never been paired, it will automatically be in pairing mode after switching on. This is indicated by a rapidly blinking blue main indicator light. To manually start pairing mode: J Switch TVLink II on. J Press the pairing button on the back, and the main indicator light will start rapidly blinking blue. J Make sure TVLink II and the streamer are within 1 meter (3 ft) range.
Completion of pairing Wait until both indicator lights turn solid blue. This can take up to 2 minutes but usually occurs within a few seconds. The TVLink II basestation can be paired to a maximum of 4 streaming devices. A fifth pairing will replace the first paired device. Two devices only need to be paired once. They remain paired after switching off and will automatically connect after being switched on again.
4. Daily use of the Phonak TVLink II TVLink II can only transmit the audio signal to one Phonak streamer at the same time. Streaming to multiple receiving streamers is not possible. 4.1 Wearing the streamer J Wear the streamer as shown and switch it on. With ComPilot or ComPilot II: With ComPilot Air II: For a more detailed explanation of the streamers, refer to the streamer’s user guide.
4.2 Connecting the devices Each time the devices are switched on, they will automatically connect to each other. J Make sure your hearing aids are switched on and worn correctly. J Make sure the streamer and TVLink II are within 1 meter (3 ft) range and the audio source (e.g. TV) is on. J Switch both devices on. J The indicator lights will turn green first. J Wait until the indicator lights turn solid blue. This may take up to 30 seconds but usually occurs within a few seconds.
4. Daily use of the Phonak TVLink II You will hear the sound of the TV directly in your hearing aids. If you cannot hear the sound, repeat the setup on page 14. If no audio input is available, TVLink II automatically stops the Bluetooth audio transmission to the streamer after 5 minutes. Its main indicator light will blink green. The distance between TVLink II and the streamer can be up to 30 m (100 ft). Line-of-sight between your streamer and the TVLink II is not required.
If the streamer is out of range of TVLink II the wireless audio transmission will be terminated. If the streamer is then moved back into the range of TVLink II, it will automatically resume streaming to your hearing aids. It may take up to 10 seconds until the streaming resumes. Both streaming light indicators should be solid blue during streaming. If the TVLink II main indicator light: – blinks green, make sure the audio input to the TVLink II is properly connected.
4. Daily use of the Phonak TVLink II 4.3 Adjusting the volume J Set the volume of the TV speakers at the level to suit other viewers. J Adjust the volume via the TVLink II volume control until the sound through the hearing aids is comfortable. To fine-tune the overall volume of the hearing aids and the TVLink II, you may use the streamer’s volume buttons: J to increase the volume. J to decrease the volume. To reduce surrounding sounds J Press and hold (2 sec) for more reduction.
J If your TVLink II is connected to the headphone socket of your TV, you may also use your TV remote control to adjust the volume via the TV directly. Please refer to the TV user guide for more details on setting the TV volume. If your TV is connected to a satellite receiver or a set-top box, make sure the volumes of these additional devices are set to a 75% level for best audio quality results.
4. Daily use of the Phonak TVLink II 4.4 Streaming pause and resume To pause the audio signal from your streamer, press the main button. or When paused: J The indicator lights will blink blue on both devices. J Your hearing aids will switch back to the most recent hearing aid program. J The hearing aid programs cannot be changed during streaming or when paused. To resume the streaming, press the streamer main button again.
4.5 TVLink II and phone calls If the streamer is paired and connected to your cell phone, you can still receive phone calls, even when using TVLink II. In case of an incoming call, the streamer automatically stops transmitting the audio signal from your TVLink II and sends the signal from your cell phone to your hearing aids.
4. Daily use of the Phonak TVLink II To accept an incoming call, briefly press the streamer main button once you hear the ringtone through your hearing aids. Press the main button again and the phone call will be ended. 4.6 Switching off devices J To end the transmission of the audio signal, switch off TVLink II by pressing the on / off button.
4.7 Understanding the indicator light The TVLink II main indicator light gives you useful information: Solid green Switched on Blink green On but no audio input Rapid blink blue Pairing mode Solid blue Streaming Blink blue Pause mode Multi color blinking Test mode, see chapter 5.1 For a more detailed explanation of the streamer indicator lights please refer to the streamer’s user guide.
5. Troubleshooting 5.1 Testing the audio transmission If you cannot hear the sound from the audio source (e.g. TV), proceed as follows. Test the connection of the streamer to the hearing aids J Use the streamer’s demo mode as described in the streamer’s user guide to find out if the streamer and the hearing aids are set up correctly. J If this fails, ask your hearing care professional to configure your streamer for your hearing aids first.
J Use the streamer volume up/down buttons to change the volume of the test sound. J If no test sound can be heard, start the pairing procedure as described on page 20. J The test sound continues for 2 minutes or until any of the TVLink II buttons is pressed. Test the cable connections If you were able to hear the test melody from TVLink II but you cannot hear the sound from the TV, there is a problem with the cable connection. J Ensure the audio cable is completely plugged in.
5. Troubleshooting The colors alternate to indicate the audio input status as well as the connection status to the streamer. Example: Red/blue/red/blue/etc: Streaming test sound no audio input detected on the TVLink II.
5.2 Questions and answers A summary of frequently asked questions and their answers: Causes What to do None of the indicator lights turn solid blue. J Devices are not switched on. J Devices are not paired. J Switch on devices. J Pair devices (page 20). I see a rapidly blinking blue indicator light on the TVLink II. J TVLink II is in Bluetooth pairing mode. J Pair devices (page 20). Only one of the blue indicator lights turned solid blue. J One of the devices is connected to another Bluetooth device.
5. Troubleshooting Causes What to do J The streamer is not correctly programmed for your hearing aids. J Ask your hearing care professional to regroup your streamer and hearing aids. I cannot hear the sound from the TV via streamer. J The devices are switched off. J The cables are not plugged in correctly. J No audio input to TVLink II. J TVLink II is in pause mode. J The distance between streamer and the TVLink II is too long. 38 J Make sure all devices are switched on. J Repeat chapter 3.3.
Causes What to do The volume during streaming is not comfortable (too low or too high). J The different TV audio sources J If TVLink II is connected to have different output volumes. the optical, coaxial, RCA/ Cinch or the SCART socket of your TV, adjust the volume by using the basestation volume buttons. J If the TVLink II is connected to the headset output of the TV, you alternatively must adjust the volume using the TV volume control. J Adjust volume of your satellite receiver or set-top box.
6. Service and warranty 6.1 Local warranty Please ask the hearing care professional, where you purchased your devices, about the terms of the local warranty. 6.2 International warranty Phonak offers a one year limited international warranty, valid as of the date of purchase. This limited warranty covers manufacturing and material defects. The warranty is valid only if proof of purchase is shown.
6.3 Warranty limitation This warranty does not cover damage from improper handling or care, exposure to chemicals, immersion in water or undue stress. Damage caused by third parties or non-authorized service centers renders the warranty null and void. This warranty does not cover any services performed by a hearing care professional in his/her office.
7. Compliance information Declaration of Conformity Hereby Phonak AG declares that this Phonak product is in compliance with the essential requirements of the Radio and Telecommunications Terminal Equipment Directive 1999/5/EC. The full text of the Declaration of Conformity can be obtained from the manufacturer or the local Phonak representative whose address can be taken from the list on www.phonak-us.com (worldwide locations).
Notice 1: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Notice 2: Changes or modifications made to this device not expressly approved by Phonak may void the FCC authorization to operate this device.
7. Declaration of Conformity This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Notice 4: Japanese Radio Law and Japanese Telecommunications Business Law Compliance. This device is granted pursuant to the Japanese Radio Law (電波法) and the Japanese Telecommunications Business Law (電気通信事業法). This device should not be modified (otherwise the granted designation number will become invalid).” More details can be found in the data sheet which can be downloaded from www.phonak-us.
8. Information and explanation of symbols XXXX The CE symbol is confirmation by Phonak AG that this Phonak product meets the requirements of the R&TTE Directive 1999/5/EC on Radio and Telecommunication Terminal Equipment. The numbers after the CE symbol are the numbers of consulted certified bodies under the above mentioned directives. This device is a class 2 device and can be operated in the EU member states without restrictions for indoor use, but must not be operated outdoors in France.
Indicates the device manufacturer, as defined in EU Directive 93/42/EEC. This symbol indicates that it is important for the user to pay attention to the relevant warning notices in this user guide. Important information for handling and product safety. EMC and radio communications compliance label Australia. Operating conditions The device is designed such that it functions without problems or restrictions if used as intended, unless otherwise noted in this user guide.
8. Information and explanation of symbols Temperature transport and storage: –20° to +60° Celsius (–4° to +140° Fahrenheit). Temperature operation: 0° to +40° Celsius (+32° to +104° Fahrenheit). Keep dry. Humidity transportation: up to 90% (non condensing). Humidity storage: 0% to 70%, if not in use. Humidity operation: <90% (non condensing). Atmospheric pressure: 500 hPa to 1100 hPa.
The symbol with the crossed-out garbage bin is to make you aware that this device may not be thrown away as normal household waste. Please dispose of old or unused device, at waste disposal sites intended for electronic waste, or give your device to your hearing care professional for disposal. Proper disposal protects the environment and health. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc., and any use of such marks by Phonak is under license.
9. Important safety information The following pages contain important safety information. Hazard warnings Keep this device out of reach of children under 3 years. Use only hearing aids that have been specially programmed for you by your hearing care professional. Dispose of electrical components in accordance with your local regulations by Phonak AG. Changes or modifications to any of the devices that were not explicitly approved by Phonak are not permitted.
For safety reasons, only use chargers supplied by Phonak or stabilized chargers with a rating of 5 VDC, min. 500 mA. Caution: electric shock. Do not insert plug alone into electrical outlets. Do not power TVLink II from a PC or laptop USB port. This may damage your equipment. Do not use the device in explosive areas (mines or industrial areas with danger of explosions, oxygen rich environments or areas where flammable anesthetics are handled) or where electronic equipment is prohibited.
9. Important safety information Product safety information When TVLink II is not in use, switch it off. Protect the device connectors, plugs, charging slot and power supply from dirt and debris. Protect all devices from excessive moisture (bathing or swimming areas) and heat sources (radiator, TV top). Protect devices from excessive shock and vibration. Clean devices using a damp cloth. Never use household cleaning products (washing powder, soap, etc.) or alcohol to clean them.
larger electronic installation or other strong electromagnetic fields, it may be necessary to be at least 60 cm (24") away from the interfering device to ensure proper operation. X-ray radiation, CT or MRI scans may destroy or adversely affect the correct functioning of the devices. Do not use these devices in areas where electronic equipment is prohibited.
Notes 54
10. Important notice Important notice FCC/Industry Canada RF Radiation Exposure Statement: This equipment complies with FCC/Industry Canada RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
029-0313-03/2014-10/ Printed in USA © Phonak AG All rights reserved Phonak LLC 4520 Weaver Parkway Warrenville, IL 60555 www.phonak-us.
