Operation Manual
34
5. Troubleshooting
5.1 Testing the audio transmission
If you cannot hear the sound from the audio source
(e.g. TV), proceed as follows.
Test the connection of the streamer to the hearing aids
J Use the streamer’s demo mode as described in the
streamer’s user guide to nd out if the streamer and
the hearing aids are set up correctly.
J If this fails, ask your hearing care professional to
congure your streamer for your hearing aids rst.
Test the connection of TVLink II to the streamer
J Switch on and wear the streamer correctly.
J Switch o the TVLink II rst, then
press the basestation volume
down and power button
simultaneously until the main
status light starts to blink in
dierent colors.
J The streamer and the TVLink II should connect now
(blue/green or blue/red blinks), and you hear a sound
test melody through your hearing aids.
1. 2.