Operation Manual
35
J Use the streamer volume up/down buttons to
change the volume of the test sound.
J If no test sound can be heard, start the pairing
procedure as described on page 20.
J The test sound continues for 2 minutes or until any
of the TVLink II buttons is pressed.
Test the cable connections
If you were able to hear the test melody from TVLink II
but you cannot hear the sound from the TV, there is a
problem with the cable connection.
J Ensure the audio cable is completely plugged in.
J Ensure you connected the cable to an output and
not an input.
J Try a dierent cable.
J Try a dierent output socket of the TV.
The basestation main indicator light gives information
during test mode.