Operation Manual

12
Getting started
Switching ZoomLink+ ON/OFF
At start-up, ZoomLink+ automatically selects the most recently
used FM channel.
ZoomLink+ automatically synchronizes Phonak multichannel
receivers to this channel, if the distance between ZoomLink+
and the Phonak receivers is less than approximately 8–10 inches
(20cm).
You may hear a beep tone when the synchronization is completed.
For customers using Phonak hearing instruments that are
compatible with analog remote controls:
J At start-up, ZoomLink+ automatically sets digital Phonak hearing
instruments with remote control compatibility to the “FM + M“
program. Your hearing care professional can change this setting
to “FM only”, if required.
J At switch-OFF, ZoomLink+ automatically resets digital Phonak
hearing instruments with remote control compatibility to the
hearing instrument program.
J Hearing instruments need to be within the operating range
of the remote control built into ZoomLink+. This range is ap-
proximately 8–10 inches (20cm).