Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 The VWRT510 High Speed Router User’s Guide V1.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 Table of Contents 1 Preface ........................................................................................................................................................................................................................................................................................................................ 4 2 LED Indicators and Connectors ................................................................
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.4 Wireless ........................................................................................................................................................................................................................................................................................................ 29 5.4.1 Basic ...................................................................................................................
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 1 Preface Thank you for choosing VWRT510 wireless router with VoIP. This product will allow you to make ATA call using your broadband connection, and provides Wi-Fi router function. This manual provides basic information on how to install and connect VWRT510 wireless router with VoIP to the Internet. It also includes features and functions of wireless router with VoIP components, and how to use it correctly.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 2 LED Indicators and Connectors Before you use the high speed router, please get acquainted with the LED indicators and connectors first. 2.1 LED Indicators Front Panel LED PHONE WLAN LAN 1/2/3/4 Status Explanation Blinking(Green) Not registered. On (Green) Registered On (Green) Wireless access point is ready. Blinking(Green) It will blink while wireless traffic goes through. On (Green) The port is connected with 100Mbps.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 2.2 Hardware Installation Before starting to configure the router, you have to connect your devices correctly. Step 1.Connect Line port to land line jack with a RJ-11 cable. Step 2.Connect the WAN port to a modem or switch or router or Internet with an Ethernet cable. Step 3.Connect one port of 4 LAN ports to your computer with a RJ-45 cable. This device allows you to connect 4 PCs directly. Step 4.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 3 Voice Prompt In any circumstance, pressing the following command to enter relevant function. The following table lists command, and description. Voice Menu Setting Options Operation code 1 1 2 3 4 5 Contents Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “1”, and VWRT510 report the current WAN port connection type Step 3.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 6 7 8 9 0 Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “6”, and VWRT510 report “Factory Reset” Step 3.Prompt "Please enter password", the method of inputting password is the same as operation 1. If you want to quit by the wayside, press “*”. Step 4.Prompt “operation successful” if password is right and then VWRT510 will be factory setting. Step 5.Press “7” reboot to make changes effective. Step 1.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 When assigning IP address in Static IP mode, setting IP address, subnet mask and default gateway is a must. If in DHCP mode, please make sure that DHCP SERVER is available in your existing broadband connection to which WAN port of VWRT510 is connected. The default LAN port IP address of VWRT510 is 192.168.11.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 4 Configuring Basic Settings 4.1 Two-Level Management This chapter explains how to setup a password for an administrator/root user and how to adjust basic/advanced settings for accessing Internet successfully. VWRT510 supports one-level management: user. For user mode operation, please type user/xxxxx(default password the the last 8 letters of LAN port MAC address) on Username/Password and click Login button for full configuration. 4.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 4.2.2 From WAN port 1. Make sure your PC can connect to the router’s WAN port correctly. 2. Getting the IP addresses of WAN port using Voice prompt. 3. Open a web browser on your PC and type http://the IP address of WAN port: 8080. The following window will be open to ask for username and password.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 N o. Name Description 1 Navigation bar Click navigation bar, many sub-navigation bar will appear in the place 2 2 Title Click sub-navigation bar to choose one configuration page 3 Parameter To configuration the parameters Every time making some changes, user should press this button to confirm the changes. After pressing the button, the red will appear to notice rebooting. To cancel the changes.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 4.5 Setting up the Internet Connection Open the Network/WAN webpage as shown below; please select the appropriate IP Mode according to the information from your ISP. There are three types offered in this page, which are Static, DHCP and PPPoE. 4.5.1 Static IP You will receive a fixed public IP address or a public subnet, namely multiple public IP addresses from your DSL or Cable ISP service providers.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 Secondary DNS Type in secondary IP address for Server necessity in the future 4.5.2 DHCP It is not necessary for you to type any IP address manually. Simply choose this type and the system will obtain the IP address automatically from DHCP server.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 Assign a specific valid user name PPPoE Account provided by the ISP Assign a valid password provided by PPPoE Password the ISP Confirm Input the password again Password Set the DNS Mode from Auto and Manual, If user choose manual, you should fill DNS Mode the primary DNS address and Secondary DNS address into Primary DNS Address and Secondary DNS Address.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 Click the button to enable or disable wireless. Radio On/Off Press to disable wireless. Press to enable wireless. Network Mode Choose one network mode from the drop down list. Network The name of the wireless name, it can be any text Nmae(SSSID) numbers or various special characters. Multiple SSSD1-3 Set more wireless network. Frequency Choose channel frequency. 4.6.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 provider. 4.7.2 Connections Connect VWRT510 to the Internet properly 4.7.3 Configuration SIP from Webpage Step 1.Open SIP Account/Line 1 webpage, as the picture in the right side. Step 2.Fill the SIP Server domain and SIP Server address (which get from you administrator or provider) into Domain Name parameter, into SIP Server Step 3.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 4.8 Make Call 4.8.1 Calling phone or extension numbers To make a phone or extension number call: a) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) have public IP addresses, or b) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) are on the same LAN using private or public IP addresses, or c) Both ATA and the other VoIP device (i.e.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 4.8.3 Call Hold While in conversation, pressing the “*77” to put the remote end on hold, then you will hear the dial tone and the remote party will hear hold tone at the same time. Pressing the “*77” again to release the previously hold state and resume the bi-directional media. 4.8.4 Blind Transfer Assuming that call party A and party B are in conversation. A wants to Blind Transfer B to C: Step 1.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5 Web Configuration This chapter will guide users to execute configuration through web. 5.1 Login Step 1.Connect the LAN port of the router to your PC Step 2.Open a web browser on your PC and type in http://192.168.11.1. The window will ask for typing username and password.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.2 Status This webpage shows the status information about product information, Network and system. It shows the basic information of the product, such as product name, serial number, MAC address, hardware version and software version. It also shows the information of Link Status, WAN Port Status, and LAN Port Status. And it shows the current time and the running time of the product.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.3 Network&Security You can configuration the WAN port, LAN port, DDNS, Multi WAN,DMZ, MAC Clone,Port Forward and so on in these two bars. 5.3.1 WAN This page allows you to set WAN configuration with different modes. Use the Connection Type drop down list to choose one WAN mode and then the corresponding page will be displayed.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 If user choose manual, you should fill the primary DNS address and Secondary DNS address into Primary DNS Address and Secondary DNS Address. Type in the primary IP address for the Primary DNS Server route Type in secondary IP address for Secondary DNS Server necessity in the future PPPoE: PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted standards: PPP and Ethernet.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 DDNS Setting Use the drop down list to select one DDNS Provider DDNS Provider domain DDNS Account Fill in the DDNS account. DDNS Password Fill in the DDNS Password. DDNS Name Fill in the DDNS name. 5.3.2 LAN LAN Port: The most generic function of router is NAT. What NAT does is to translate the packets from public IP address to local IP address to forward the right packets to the right host and vice versa.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 DHCP Server: Router has a built-in DHCP server that assigns private IP address to each local host. DHCP stands for Dynamic Host Configuration Protocol. The router by factory default acts a DHCP server for your network so it automatically dispatch related IP settings to any local user configured as a DHCP client.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.3.3 DMZ/Port Forward DMZ If or not enable DMZ DMZ Enable DMZ Host IP Enter the private IP address of the DMZ host Address Picture 1 Port Forward 5.3.4 MAC Clone Some ISPs will require you to register your MAC address. If you do not wish to re-register your MAC address, you can have the router clone the MAC address that is registered with your ISP.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 Step 1.Press button to clone the currently PC MAC address to router’s Internet port. Step 2.Press Step 3.Press button to save the changes button to make changes effective 5.3.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.4 Wireless 5.4.1 Basic Select Radio On to enable the wireless, select Radio Off Radio On/Off to disable wireless. Network Mode Choose one network mode from the five types. The name of the wireless name, it can be any text SSID numbers or various special characters. The default SSID is "VWRT510131028". Multiple User can set multiple SSID. SSID1-3 broadcast(SSI If or not enable SSID broadcast.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.4.2 Wireless Security Choose one SSID from SSID, Multiple SSID1, SSID Choice Multiple SSID2 and Multiple SSID3. Select an appropriate encryption mode to improve the security and privacy of your wireless data packets. Security Mode Each encryption mode will bring out different web page and ask you to offer additional configuration. 5.4.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.4.4 WPS WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection between wireless station and wireless access point (vigor router) with the encryption of WPA and WPA2. It is the simplest way to build connection between wireless network clients and vigor router. Users do not need to select any encryption mode and type any long encryption passphrase to setup a wireless client every time.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.4.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.5 SIP Account 5.5.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.5.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.5.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.6 Phone 5.6.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.6.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.6.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.7 Security 5.7.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.7.2 DMZ 5.7.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.7.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.7.5 Content Filtering 5.8 Administration 5.8.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 NTP Enable If or not enable NTP Current Time Display the current time. NTP Settings Select the time zone. Primary NTP The primary NTP server Server Secondary NTP The secondary NTP server Server NTP Set the NTP synchronization. synchronization 5.9 System Log By default, local system log is enabled, user can check the system log in Status-->Basic page.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 5.10 Logout Press the logout button to logout, and then the login window will appear. 5.11 Reboot Press the Reboot button to reboot VW RT510.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 6 Trouble shooting of the guide 6.1 Setting your PC gets IP automatically Following are the process of setting your PC gets IP automatically Step 1.Click the “begin” Step 2.Select “control panel”, then double click “network connections” in the “control panel” Step 3.Right clicks the “network connection” that your PC uses, select “attribute” and you can see the interface as picture 1: Step 4.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 6.2 Can not connect to the configuration Website Solution: Check if the Ethernet cable is properly connected, then Check if the URL is right wrote, the format of URL is: http:// the IP address, if you login from the WAN port, user must enable the remote login and change the password firstly, and add 8080 after the IP address since 8080 is the default remote login web port, URL is http://IP address:8080.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 7 Statement FCC Radiation Exposure Statement Readynet Solutions Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Copy Right 2013 All Rights Reserved by READYNET SOLUTIONS LIMITED V1.0 This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
