User's Manual

21
Programming Amigo R1/R2 Receivers
A. A. To assign receiver Name (i.e., child’s name), use the keypad buttons ▲ ▼◄ ► to
navigate. Delete the current name by pressing ◄, while standing on the top line. Space
can be inserted between names by pressing ►. Within this screen, use the keypad
buttons to select the desired character, then press the SYNC button to save each
character. To SHIFT, highlight SHIFT and press the SYNC button. When fi nished,
highlight SAVE and press the SYNC button.
To exit and cancel, press the C (CLEAR) button.
B. Assign Ear. Select Right or Left using ▲ ▼ buttons. Press the ◄ button to save and
exit.
C. Choose FM Gain. Default setting is 0. Use ▲ ▼ to navigate and change gain value.
When fi nished, press the ◄ button to save and exit.
D. Choose FM+HA Gain; default is +10. Use ▲ ▼ to navigate and change gain value.
When fi nished, press the ◄ button to save and exit.
E. 3 position switch: You can lock the user switch to a single function, or set to unlock.
Use ▲ ▼ to navigate and press SYNC to select. When fi nished, press ◄ to save and
exit. While the switch will still move, the function will be locked as programmed.