User's Manual

25
B. Scan and Select primary and TT channel: Press ► to begin the scanning process.
Upon completion, scroll through the available channels in the Primary list and select
one Primary channel by pressing SYNC, then press ◄ to save and exit. Now, choose
TT from the menu and select one TT channel from the bolded (available) channels.
Press SYNC then press ◄ to save and exit.
C. Monitor Single Channel: This function allows you to monitor the quality of a single
channel.
Press ► to access the menu and insert the Monitor earphones into the audio jack on
the bottom of the transmitter.
You can increase the volume by pressing ► to highlight the headphones icon.
Highlight the channel then press ▲ ▼ to scroll and select the desired channel to
monitor.
Listen for interference; if detected, you may wish to change the primary channel
used in that classroom.
Note: Make sure you have removed the microphone cord on the monitoring transmitter.