User Manual
1JUBI 12A LITE / JUBI 15A LITE
English
INTRODUCTION
Congratulations on your purchase of the Phonic Jubi 12A
Lite or Jubi 15A Lite active loudspeakers. The Jubi’s 320
Watt (continuous) amplier uses both Class D and AB
technology to produce up to a shattering 123 dB maximum
SPL. This provides sufcient power for a wide range of
venues, large and small. Jubi’s stylish polymer enclosure
also improves acoustical accuracy by minimizing distortion
and diffraction. Finally, reliability and durability was the
paramount factor throughout the Jubi’s development.
With 320 Watts of ground shaking power, a 2-channel on-
board mixer, custom engineered transducers, and great
versatility, the Jubi active loudspeakers simply excel.
FEATURES
● Remarkable sound, remarkable power, and remarkable
style in a lightweight, durable enclosure
● 320 Watts of continuous power using Class D technology
● 123 dB maximum sound pressure level
● 12" or 15" woofer matched with 1" compression tweeter
● Flat frequency response between 53/56Hz and 20kHz
● 2 channel onboard mixer: mic channel featuring an
XLR input and 1/4" TRS phone jack, plus a line channel
with 1/4" TRS phone jack and stereo RCA inputs
● Record audio directly to USB ash drives
● Digital MP3 audio playback from USB ash drives
● Send speaker's main signal off to additional speakers
or ampliers through a balanced XLR output connector
● 4th order phase-accurate Linkwitz-Riley crossover
● 35mm pole mount for extended audience reach
● Impact resistant polymer enclosure with internal
bracings
● Tour grade steel grille (1.2 mm)
● Rotary EQ controls for high and low frequency audio
APPLICATION
35mm mounting point
PLAYBACK
The USB player supports WAV, WMA and MP3 playback.
1. Insert an appropriately formatted (FAT32) USB ash
drive.
2. On the main menu, select “Playback” and press the
PLAY button.
3. Press the PLAY button to play the current track, or
the << and >> buttons to skip forward and backwards
between tracks.
4. Press the MENU button while in the Playback mode
to access the File Browser, Delete File, Repeat Mode
and Volume Control functions.
5. Press and hold the MENU button for three seconds to
exit playback mode and return to the main menu.
Folders - Freely navigate songs in each folder on USB
ash disc using the << and >> buttons. Press PLAY
button to select, press MENU button to go back.
Repeat Mode - There 4 repeat modes available.
No Repeat - Play each le in the current folder or root
for once.
Repeat one - Constantly repeat selected song.
Repeat Folder - Constantly repeat all the song in the
certain folder or root.
Random – Enables random playback of les in
current folder or root.
RECORD
Users can record high quality WAV format.
1. Insert an appropriately formatted (FAT32) USB ash
drive.
2. In the main menu, select “Record” and press the
PLAY button to enter recording mode.
3. Select between the 128 kbit/s and 192 kbit/s WAV
recording modes and press the PLAY button.
4. Record mode will begin in standby/pause. Push the
Play/Pause button to begin recording. The unit will
save the recorded le into the RECORD directory on
the USB device.
5. Push the Play/Pause button to pause recording.
Pushing the Play/Pause button again will resume
recording from the position at which it was paused.
7. Press the MENU button at any time to save the
recording. Once the recording is saved, the system
will automatically skip to the next track.
8. To exit out of the playback mode and return to the
main menu, press and hold MENU button for three
seconds.
NOTE:
1. The MP3 Recorder rotary control will adjust the
playback level only and will not affect recording levels.
The only level controls that will affect the recording
level are those found on the individual Mic and Line
input channels.
2. Users may experience very short instances of drop
outs during playback of recorded WAV les.
1. Read these instructions before operating this
apparatus.
2. Keep these instructions for future reference.
3. Heed all warnings to ensure safe operation.
4. Follow all instructions provided in this document.
5. Do not use this apparatus near water or in locations
where condensation may occur.
6. Clean only with dry cloth. Do not use aerosol or liquid
cleaners. Unplug this apparatus before cleaning.
7. Do not block any of the ventilation openings. Install
in accordance with the manufacturer
’
s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plug, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or
table by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-
over.
13. Unplug this apparatus during lighting
storms or when unused for long
periods of time.
14. Refer all servicing to service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated
“
dangerous voltage
”
within the
product
’
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is in-
tended to alert the user to the presence of important operat-
ing and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: To reduce the risk of or electric shock, do
not expose this apparatus to rain or moisture.
CAUTION: Use of controls or
adjustments or performance
of procedures other than those may result in
hazardous radiation exposure.
The apparatus shall not be exposed to dripping or splashingand that no objects with liquids, such as vases,
shall be placed on the apparatus. The MAINS plug is used as thedisconnect device,the disconnect device shall
remain readily operable.
Warning: the user shall not place this apparatus in the area during theoperation so that the mains switch
can be easily accessible.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN