Installation Instructions

Circular

Mounting strap

1ea

Box Screw

Mounting

screws

2sets

Deco Nut

(round nut)

2ea

Green Ground

Screw

1ea

Wire

Connnector

3ea

Part Needed Quantity

Reason why ( missing, scratched, broken glass, bent, bad finish)

Comments

For Customer Service, contact the place of purchase to arrange for replacement parts.

FIXTURE ASSEMBLY INSTRUCTIONS

Read and review installation instruction sheet

before assembling the fixture.

1051-BA1 SBZ

1.Slide the Glass Shade ( H ) over Socket (F)

and secure Glass Shade (H) by threading the

Socket Ring (J) to Socket (F) until tight.

2. Install the light bulbs in accordance with the

fixture's specifications.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING)

Fig 1

NOTE: INSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

PARTS & ASSEMBLY SHEET

Fixture Name: Hidalgo 1051-BA1 SBZ

This fixture assembled PO:__________ Date: ________

Notice:

Please review the parts listing and check for all parts before assembling the fixture. If any parts

are missing or damaged, please note onthis sheet and contact the place of purchase to arrange for

replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:_____________

to be filled out by retailer

PAGE 1
PARTS & ASSEMBLY SHEET Fixture Name: Hidalgo 1051-BA1 SBZ This fixture assembled PO:__________ Date: ________ Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts. PARTS LIST Company Name:_______________________Co.
PAGE 2
INSTALLATION INSTRUCTIONS Fixture Name: Hidalgo 1051-BA1 SBZ For Wall Mount Light Fixture WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER. HANGING THE FIXTURE (Fig.1) Fig. 1 1. Carefully remove the new fixture from the carton and the yellow bag that holds all your parts. Check that all parts are included as shown in the illustration and parts list. 2. Shut off power at the circuit breaker and remove the old fixture from ceiling, including the old mounting strap. 3.