Installation Instructions

ManualsBrandsPhoton Lighting ManualsIndoor LightingRoswell 5" Sovereign Bronze 1-Light Mini Pendant

Circular

Mounting strap

1ea

Mounting screws

8/32T*1-1/2"L

2ea Box Screw 2ea

Green screws 1ea Deco or Ball Nut 2ea Wire connectors 3ea

Rod 3 ea

Part Needed Quantity

Reason why ( missing, scratched, broken glass, bent, bad finish)

Comments

For Customer Service, contact the place of purchase to arrange for replacement parts.

4. Place the Glass Shades (J) over the Threaded

Sockets(I) and secure by threading the Socket Ring (K)

to Threaded Socket (I) until tight..

5. Install the light bulbs in accordance with the fixture's

specifications.

(DO NOT EXCEED MAXIMUM WATTAGE RATING)

IXTURE

SSEMBLY

NSTRUCTIONS

Read and review installation instruction sheet before

assembling the fixture.

1051-M1L SBZ

1. By measuring determine correct number of rods

needed for proper hanging height. There are 3 optional

12" rods included.To shorten the fixture slide the excess

12" rods off the wire.To lengthen the fixture thread the

additional rods onto the wire.

2. Pull the fixture's wire through the Rods (G).

3. Thread Rod/rods (G) into Fixture frame (H) using the

nipples until tight, repeat for the additional rods. Thread

the Swivel assembly (F) to the Rod (G).

Fig 1

NOTE: I

NSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

PARTS & ASSEMBLY SHEET

Fixture Name: Hidalgo 1051-M1L SBZ

This fixture assembled PO:__________ Date: ________

Notice:

Please review the parts listing and check for all parts before assembling the fixture. If any parts are

missing or damaged, please note onthis sheet and contact the place of purchase to arrange for

replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:_____________

to be filled out by retailer

Summary of content (2 pages)

PAGE 1
PARTS & ASSEMBLY SHEET Fixture Name: Hidalgo 1051-M1L SBZ This fixture assembled PO:__________ Date: ________ Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts. PARTS LIST Company Name:_______________________Co.
PAGE 2
INSTALLATION INSTRUCTIONS Fixture Name: Hidalgo 1051-M1L SBZ For Mini pendant Fixture WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER. HANGING THE FIXTURE as Semi flush (Fig. 1) Fig. 1 1. Carefully remove the new fixture from the carton and the yellow bag that holds all your parts. Check that all parts are included as shown in the illustration and parts list. 2. Shut off power at the circuit breaker and remove the old fixture from ceiling, including the old mounting strap. 3.