Installation Instructions

Mounting

Strap

Mounting screw Mounting screw

1ea

L4"*H1.5mm

2ea 8/32-IP*H1"

2ea

8/32-IP*H1-1/2"

Hex nut Wire connnector Deco Nut

1ea

3/8-IP*H3mm

3 ea P4 Orange

Part Needed Quantity

Reason why ( missing, scratched, broken glass, bent, bad finish)

Comments

PARTS & ASSEMBLY SHEET

This fixture assembled PO:__________ Date: ________

Fixture Name: Multi-Family 1270-9/11/13 PW/CH

2ea 10x 9.5mm

Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are

missing or damaged, please note onthis sheet and contact the place of purchase to arrange for

replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:_____________

to be filled out by retailer

1270-9/11/13 PW/CH

Read and review installation instruction sheet

before assembling the fixture.

FIXTURE ASSEMBLY INSTRUCTIONS

For Customer Service, contact the place of purchase to arrange for replacement parts.

1. Place the Glass (J) put in the fixture's Canopy (F),

with on glass mouth scoop channel and fixture's

Canopy inside of salient point coordination,

counterclockwise rotation on until tight.

(DO NOT EXCEED MAXIMUM WATTAGE RATING!)

Fig 1

PAGE 1
PARTS & ASSEMBLY SHEET Fixture Name: Multi-Family 1270-9/11/13 PW/CH This fixture assembled PO:__________ Date: ________ Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts. PARTS LIST Company Name:_______________________Co.
PAGE 2
INSTALLATION INSTRUCTIONS Fixture Name: Multi-Family 1270-9/11/13 PW/CH For Flush Mount Light Fixture WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER. HANGING THE FIXTURE (Fig. 1) Fig. 1 OUTLET BOX (CEILING) 1. Carefully remove the new fixture from the carton and the yellow bag that holds all your parts. Check that all parts are included as shown in the illustration and parts list. A B C D E 2.