Installation Instructions

Assembly instructions
Unpack the lamp and install bulb
□ Prior to installing the bulb, inspect socket
for silica packet. If packet is present, then
remove and throw away. Do not expose it to
children or pets.
□ Install one 120V, 60HZ, 150-Watt max,
medium-base type A bulb (not included) into
the socket of the light lamp.
□ Plug cord into an outlet and turn on at the
switch.
Socket
Switch
Care and Cleaning
□ Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Possible Cause
□ The bulb is burned out.
□ The power is off.
□ The circuit breaker is off.
□ There is an exposed wire.
□ There are too many items on
one circuit.
□ Discontinue use of the lamp.
□ Contact a qualified electrician or
call the Customer Service Team at
904-642-4340.
□ Unplug other items on the circuit.
□ Ensure that the circuit breaker
is set in the on position.
□ Ensure that the power supply
is turned on.
□ Replace the light bulb.
Solution
The bulb will not light.
The fuse blows or a
circuit breaker trips when
the light is turned on.
Problem
□ Did not insert plug into power
outlet.
□ Ensure that the plug is fully and
properly inserted into the power
outlet.
Important safety instructions
□ This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. never use with an extension cord
unless plug can be fully inserted. Do not alter the plug.