USE AND CARE GUIDE SPYGLASS TABLE LAMP-#30437 Questions, problems, missing parts? Before returning to the store, call Kenroy Home Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 904-642-4340 THANK YOU We appreciate the trust and confidence you have placed in Kenroy Home through the purchase of this lamp. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information ....................................................................................................................................... 2 Warranty ...................................................................................................................................................... 2 Pre-Installation ............................................................................................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This lamp requires the use of two 120V, 60HZ, 100-Watt max, medium-base type A bulb s (not included). Do not exceed the recommended wattage.
Assembly instructions 1. Unpack the lamp & assemble pole □ Carefully organize and place all parts on a smooth, flat surface. line up all of the parts according to the assembly diagram. □ Screw the pole (F) to top of the base (G). F G 2. Assemble the socket assembly □ Pull the excess power cord through base (G). □ Screw the socket assembly (E) to top of the pole (F).
Assembly instructions (continued) 3. Assemble the stem □ Screw the stem (D) to top of the socket assembly (E). D E 4. Assemble the shade A □ Place the shade (C) over the stem (D). B □ Secure the shade (C) to stem (D) with rubber washer (B) and finial (A).
Assembly instructions (continued) 5. Install the bulbs □ Prior to installing the bulbs, inspect sockets for silica packet. If packet is present, then remove and throw away. Do not expose it to children or pets. □ Install two 120V, 60HZ, 100-Watt max. medium-base type A bulbs (not included) into the sockets of the light lamp. □ Plug cord into an outlet and pull the chains to turn lamp on.
Important safety instructions □ This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. never use with an extension cord unless plug can be fully inserted. Do not alter the plug. Care and Cleaning □ Clean the lamp with a soft, dry cloth.
www.kenroyhome.com CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.