Installation Instructions

5. Install the bulbs
□ Prior to installing the bulbs, inspect sockets for silica packet. If packet is
present, then remove and throw away. Do not expose it to children or pets.
□ Install two 120V, 60HZ, 100-Watt max. medium-base type A bulbs (not
included) into the sockets of the light lamp.
□ Plug cord into an outlet and pull the chains to turn lamp on.
Assembly instructions (continued)
Pull chain switch
OPTIONAL PULL CHAIN LENGTH ADJUSTMENT
If you prefer to shorten your pull chain length, first slide
pull up to expose the clip on the end of the chain.
next, remove the clip, cut the chain, and replace clip.