Installation Instructions

ManualsBrandsPhoton Lighting ManualsIndoor LightingBarrington Pewter 4-Light Vanity Light

Mounting Strap

Junction Box

Screw

Mounting Screw

1ea 4" X 3" 2ea 8/32" X 1" 2ea 5/32" X 28mm

Wire

Connnector

Hex Nut

Deco Nut

(round nut)

2ea P2 Orange 2ea 5/32" X 3.5mm 2ea 9 X 9.5mm

Green Ground

Screw

Socket Ring

(AB only)

Socket Ring

(PW, RBZ only)

1ea 8/32" X 10mm

4ea 51 x 23mm 4ea 50 x 9mm

Part Needed Quantity

Reason why (missing, scratched, broken glass, bent, bad finish)

Comments

Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or

damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:_____________

below to be filled out by retailer

PARTS & ASSEMBLY SHEET

This fixture assembled PO:__________ Date: ________

Fixture Name: Lancaster 6005-BA4 PW/RBZ/AB

For Customer Service, contact the place of purchase to arrange for replacement parts.

6005-BA4

Read and review installation instruction sheet before

assembling the fixture.

FIXTURE ASSEMBLY INSTRUCTIONS

NOTE: INSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

1. Slide the Glass Shade (H) over Socket (I). Secure

Glass Shade (H) by threading the Socket Ring (J) to

Socket (I).

2. Repeat step 1 for remaining glass shades.

3. Install light bulbs in accordance with fixture's

specifications.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)

Fig. 1

6005-BA4PartsInstallation_111004m.xls

Summary of content (2 pages)

PAGE 1
PARTS & ASSEMBLY SHEET Fixture Name: Lancaster 6005-BA4 PW/RBZ/AB This fixture assembled PO:__________ Date: ________ Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts. PARTS LIST Company Name:_______________________Co.
PAGE 2
INSTALLATION INSTRUCTIONS Fixture Name: Lancaster 6005-BA4 PW/RBZ/AB For Wall Mount Light Fixture WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER. HANGING THE FIXTURE (Fig. 1) Fig. 1 1. Carefully remove the new fixture from the carton and the JUNCTION BOX yellow bag that holds all your parts. Check that all parts are included as shown in the illustration and parts list. 2. Shut off power at the circuit breaker and remove the old E fixture from wall, including the old mounting strap. B A F 3.