Installation Instructions
Canopy Wire connectors Top loop
1ea 5" X 1" 2ea P3 Orange 1ea 3/8 x 66mm
Chain
Junction Box
Screw
Socket Washer
1ea 6ft x 3.8mm 2ea 8/32" x 1" 5ea 58 x 1mm
Chain connector Nipple
2ea 4 X 55mm 1ea 3/8 x 30mm x 5mm 1ea 3/8 x 45mm
Mounting Strap Hex Nut Srping Washer
1ea 3/4" X 4"
2ea 3/8 x 3mm 1ea 15 x 3mm
Socket Ring
(AB only)
Socket Ring
(PW, RBZ only)
Green Ground
Screw
5ea 51 x 23mm 5ea 50 x 9mm
1ea 8/32" X 10mm
Part Needed Quantity
Part Needed Quantity
Reason why (missing, scratched, broken glass, bent, bad finish)
Comments
Fig. 1
NOTE: INSTALL THE GLASS ASSEMBLY AFTER THE
FIXTURE IS HUNG.
PARTS & ASSEMBLY SHEET
6005-D5
Read and review installation instruction sheet before
assembling the fixture.
FIXTURE ASSEMBLY INSTRUCTIONS
This fixture assembled PO:__________ Date: ________
Fixture Name: Lancaster 6005-D5 PW/RBZ/AB
Canopy Loop
with Collar
ASSEMBLING THE FIXTURE (Fig. 1)
1. Feed the fixture wires through the Top Loop (J) and pull
the wires until taut.
2. Then, screw the Top Loop (J) to the threaded center
column of Frame (M) until tight.
3. Gently spread the arms until evenly spaced if arms are
packed closed.
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
For Customer Service, contact the place of purchase to arrange for replacement parts.
C
D
6005-D5PartInstallation_111004m.xls Page 1