User's Manual

10
4. After setting options
，
press button to
conrm and exit the settings interface.
5. Each groups (GR) A,B,C,D have a
corresponding button on the transmitter.
Pressing the corresponding button will
activate or deactivate a group. Active Groups
will be displayed on the LCD, Inactive groups
will not be displayed on the LCD.
Note:
1. Digital ID is only available when using
Channels 5-16.
2. After making interface adjustments on
the transmitter, if
button is not pressed,
settings will be automatically conrmed 5
seconds.
The Ares II Receiver
Setting Groups (GR), channels (CH)
and Digital ID on Receiver
1. Press the Settings button to enter
channels and Digital ID settings interface.
2. Consecutively pressing the
button to
cycle the display between channels, groups,or
Digital ID setting. The selected feature will
ash to indicate it is selected
3. Press the Selection Buttons Up or Down
to set Channels (CH), groups and
Digital ID value
4. After setting options
，
press
button to
conrm and exit the settings interface.