User's Manual

III.LCD Display
1.
Transmission Channel Ch.1-Ch.15and Auto
2.
Wireless radio ID 0000-9999
3.
Firing group Up to five groups (A/B/C/D/E)
Battery power state
-
Slave units and master
unit in contact state
-
4.
Phottix Laso
receiver in
contact state with
flash that attached
to its hot shoe
mount
-
IV. Wireless Flash Shooting: Radio Transmission
Note:
The transmitter attached to the camera is called the master unit, the Phottix Laso receiver and a
flash that is wirelessly controlled is called the slave unit.
Wireless Flash Shooting
Set the master unit and the Phottix Laso receiver to exactly the same channel and ID, and
the flash mounted on the Phottix Laso receiver set to ETTL mode. The flash (slave)
will fire at the flash mode and flash output set on the master unit. Flash exposure
compensation and other settings set on the master unit will be automatically set in the
flash (slave). You don’t need to operate the slave unit.
The Phottix Laso receiver can be used to receive wireless radio signal transmitted from the
Phottix Laso transmitter、Canon ST-E3-RT Speedlite Transmitter or radio-enabled Canon
flashes.