User's Manual

digits one by one. Press
function button 4 for
corresponding to to
return to the shooting-ready
state.
5. When the transmission between
the master unit and slave unit is
established, the <LINK> lamp
lights green.
4. Scanning the Master Unit Transmission Channels to Set
Phottix Laso transmitter is able to scan the radio reception status and set the master
unit’s transmission channel automatically or manually. When the channel is set to
“AUTO”, the channel with the best reception signal is automatically set. When setting
the channel manually, you can set the transmission channel again while referring to
the scan results.
1. Scanning while “AUTO” is set:
Press function button 4 to display
, and then function
button 3 corresponding to
. The channel is reset to one
with a good reception signal.
2. Scanning while Ch.1 to 15 is set:

Press function button 4 to display
, and then function
button 3 corresponding to
. The radio reception status is
displayed in a graph. The higher the peak of the channel in the
graph, the better the radio reception signal.
Turn<
>to select from Ch.1 to 15, and press< >button to
return to shooting-ready state.