User's Manual
turning < > only, without operating function button 2 .
2. If the camera’s exposure compensation is set to 1/2-stop increments, flash
exposure compensation will be up to ±stops in 1/2-stop increments.
3. FEB
With FEB (Flash Exposure Bracketing) function, you can take three shots while
automatically changing the flash output. The settable range is up to ±3 stops in 1/3-stop
increments.
1. Press function button 4 until is displayed.
2. Press function button 3 corresponding to , is
displayed and the FEB level display is highlighted.
3. Set the FEB level: turn< > to set FEB level and press
<
> button.
4.”0.3”indicates 1/3 stops, and”0.7”indicates 2/3 stops.
5. When used together with flash exposure, FEB shooting
is performed based on the flash exposure compensation
amount.
Note:
1) You can choose whether or not to cancel FEB automatically after shooting three
shots with FEB by setting C.Fn03.
2) You can change the order of FEB sequence by setting C.Fn04.
6. High-speed Sync
With the high-speed sync function, the flash can synchronize with all shutter speeds.
This is convenient when you want to use aperture-priority AE for fill-flash portraits of
a subject.
High-speed sync function is available for EOS digital cameras since 2012 only.
1. Press function button 4 until is displayed.
2. Press function button 2 corresponding to ,
will be displayed on the screen. Check if is lit in
the view finder.
3. Press function button 2 will disable .