User's Manual

1.5 Take the picture: the slave unit flash at the set flash ratio.

2. Autoflash Shooting with Thee Slave Groups

You can add firing group C to firing groups A and B. C is convenient to set lighting so

as to eliminate the subject’s shadow. The setting method is the same as “Autoflash

Shooting with Two Slave Groups”

At the ratio mode

, group A and B can be set by flash ratio. Group C is

independent with its flash output level assigned by the camera.

2.1 Set a flash as firing group C: For the slave unit settings, see the flash’s

instruction manual.

2.2 Press the master unit’s function button 4 to display

. Press function

button 2 corresponding to to set to < >

2.3 Set flash exposure compensation as required

Press function button 3 corresponding to , turn < > and press function button

3 corresponding to . Again turn < > and press < > button to set the flash

exposure compensation amount for group C.

Press function button 4 corresponding to to return to shooting-ready state.