User's Manual

4. Set the flash output or flash exposure compensation amount
While a firing group is selected, press function button 3 corresponding to <*±>, turn
< > to set the flash function corresponding to the flash mode, and press< >
button.
When using the <M> mode, set the flash output. When using the <ETTL>or<Ext.A>,
set the flash exposure compensation amount as required.
Press function button corresponding to when is displayed, flash
exposure compensation can be set for all groups.
Repeat step 4 to set the flash function of all groups.
5. Take the picture: each slave units fires in the flash mode set for each group.
Linked Shooting
Linked shooting is a function that automatically releases the shutter of a slave unit
camera by linking it to a master unit camera. You can shoot with linked shooting for
up to 16 units, including both master units and slave units. This is convenient when
you want to shoot a subject from multiple angles at the same time.
To shoot with linked shooting, attach Phottix Laso transmitter, and canon flash that
supports radio transmission wireless shooting or the canon ST-E3-RT Speedlite
transmitter to the camera.