User's Manual

Linked shooting setting

1. Set to linked shooting mode

Press and hold linked shooting button until is displayed. Linked

shooting mode’s “Slave unit” is set; Press linked shooting button again to set

“Master unit” of linked shooting mode.

2. Set the channel and ID

Set the channel by pressing function button 2 corresponding to

, turn < > to

select the channel and press < >button. You also choose to scan the radio reception

status and set the master unit’s transmission channel automatically or manually. For

operation please refer to preceding wireless setting section.

Set wireless radio ID: press function button 3 corresponding to , turn < > to

select the digit to be set, and press < > button. Again turn < > to select a number

from 0-9, and press the < > button. Repeat the procedure to set the 4 ID digits one

by one. Press function button 4 for corresponding to to return to the

shooting-ready state.

3. Set the camera’s shooting functions

4. Set all the transmitters

Repeat steps 1to3 and set all the transmitters to “Master unit” or “Slave unit” in the

Master

Slave