User's Manual

Set the order of FEB sequence as
following:
- : Decreased exposure（darker）
0: Standard exposure
+ : Increased exposure（brighter）
Set the flash output as 1/32 when firing
the test flash in E-TTLⅡ/E-TTL
autoflash
: Test firing with
autoflash
Set the flash output as 1/1 when firing the
test flash in E-TTLⅡ/E-TTL autoflash
Turn< >and press button function
corresponding to
to perform flash
exposure compensation
: Flash exposure
metering setting
Turn< >directly to perform flash
exposure compensation without pressing
button.
Disable beep to sound on Phottix Laso
transmitter when the slave unit is fully
charged
: Beep
Enable a beep to sound on Phottix Laso
transmitter when the slave unit is fully
charged
When a button or dial is operated, the
LCD panel illumination go on for 12 sec.
Disable LCD panel illumination
: LCD panel
illumination
When a button or dial is operated, the
LCD panel illuminates and keeps always
on.
2. P.Fn: Setting personal functions
1. When Custom Function screen is displayed, press function button 1 corresponding
to to display Personal Function screen.
2. Set the personal function in the same way as step 3 and 4 for the custom function.
3. To restore all the default setting of personal function, set it in the same way as step
6 for custom function.
Personal Functions Chart
Personal
Function
No.
Functions Setting No. Setting and descriptions
: LCD panel
You can adjust the contrast of the LCD panel in
5 levels.