User Guide

7
En
INSTRUCTION MANUAL
button to proceed to main screen.
2. With the reciver is powred o, press and hold
and power button for 2s.
The Icon versions will be displayed on the LCD. Press any button to proceed to
main screen.
Menu Setting
The Odin II TCU features 10 menu functions. To access and edit the menu
functions interface:
1. Press the power button to enter the menu function interface.
2. Turn
and select the item to be set, and press button.
3. Turn
to change the setting, and press button to conrm the change.
4. Press
button to exit the menu function interface.
Menu Specications
CH
ID
BEEP
A.F.
SLEEP
01-32
0000-9999
ON
OFF
ON
OFF
ON
OFF
Channel setting
ID setting(only available for channel 5-32)
Turn ON touch tone beep
Turn OFF touch tone beep
Turn ON AF assist illuminator
Turn OFF AF assist illuminator
Turn ON: TCU enters IDLE mode automatically
after 5 minutes if no keys are pressed
Turn OFF：TCU will not enter Idle mode
01
02
03
04
05
Menu Function
Number
Function Number of Settings Setup instructions
B.G.LIGHT
ODS
TTL PREF
LCD
RESET
ON
OFF
0.0-5.0
In increment of 1/3
f-stops ±3EV
1/5, 2/5, 3/5, 4/5, 5/5
5 adjustment levels
OK
Turn ON LCD backlight
Turn OFF LCD backlight
High speed sync delay time
TTL for your preference
Changes LCD Contrast
Reset
06
07
08
09
10
Technical Specications
2.4 GHz
100m＋
32 channels
5 groups– A, B, C,D, E
2 x AA Alkaline batteries / 2 x NI-MHbatteries (TCU and
Receiver), 5V DC on receiver (external power port)
* If using a 5V DC Adapter remove batteries from the
receiver.
1/8000 sec*
Outputpower ＜5mW
Working Range 5m (lens zoomrange17-105mm)
Frequency
Distance
Channels
Groups
Batteries
Max. sync speed
AF Assist
Illuminator
(L109.3) x (W 71.7) x (H 56.0) mm(transmitter)
(L 81.8) x (W 69.3) x (H 47.6) mm (receiver)
127.8g（transmitter）94.8g（receiver）- without batteries
Body
dimensions
Weight
* On compatible cameras / ashes
This product belongs to Class 3R type laser product" according to IEC
60825-1/GB 7247.1 standard “radiation safety of laser type product”.
Class 3R: This level of laser if not viewed by naked eye is considered to be
safe. This level may exceed MPE, but is not harmful normally. This level of
visible laser cannot be rated over 5mW.
The AF Assist Light is set to “o” by default in the menu.
Warning:
1. This product is a precise electronic instrument. Do not expose to damp
environments or dust.
2. Make sure all the devices’ power is switched o before installing.
3. Do not drop or crush.
4. This product can not be used in a high temperature, ammable and explosive
environment.
5. If you do not plan to use your Odin TCU and receiver for a long period of time,
it is best to remove the batteries to prevent possible battery damage
6. Do not use harsh chemical(s) or solvents to clean the body. Use a soft cloth or
lens paper.
Interference: The Phottix Odin transmits and receives radio signals at 2.4 GHz. Its
performance can be aected by electrical current, magnetic elds, radio signals,
wireless routers, cellular phones, and other electronic devices. Environmental
objects, such as large buildings or walls, trees, fences, or cars can also aect
performance. If your Phottix Odin receiver will not trigger move its location
slightly.
www.phottix.com