User Manual

Compatibility with Phottix Flashes/Strobes/Flash Triggers
Note:
1） Set the master unit and slave units to the same channel and corresponding
groups.
2） Strato receiver comes without group selection. It can be triggered by any
group of Odin II transmitter at the same channel.
3） When using Odin II transmitter with Strato/ Strato II Multi receiver, the flash
attached to the receiver has to be set to Manual mode.
4） When using Odin II transmitter with Strato/ Strato II Multi receiver in HSS
mode, the flash may not be able to sync.
5） Strato and Strato II Multi transmitter cannot trigger a Odin II receiver.
V．C.Fn: Setting the Custom Function
Odin II transmitter comes with a number of programmable custom functions. To edit
those functions, see below:
1. Press
to display the custom function screen.
Master Unit Slave Units
Support
TTL&M Info
Transmission?
Phottix Odin TTL Receiver for Canon
YES
Phottix Strato Receiver for Canon
NO
Phottix Strato II Multi Receiver for
Canon
NO
Phottix Mitros+ Transceiver Flash for
Canon ODIN RX Mode
YES
Phottix Indra PPL500 Studio Light
Odin-C Mode
YES
Phottix Indra 360 TTL Studio Light
Odin-C Mode
YES
Phottix Indra PPL500 Studio Light
Strato II Mode
NO
Odin II Transmitter
Phottix Indra 360 TTL Studio Light
Strato II Mode
NO
Phottix Odin TTL
Transmitter for Canon
Odin II Receiver
YES
Phottix Mitros+
Transceiver Flash for
Canon ODIN TX
Mode
Odin II Receiver
YES