User Manual

or to set the ID value for the chosen digit; Press to exit the setting
mode. Repeat the operation to set value for the 4 ID digits one by one.
Note: The Odin II is at its compatibility mode with Odin I when set to 1-4 channels.
Under the mode, the transmitter can only control 3 groups (A, B, C), the group D and
E will not be displayed on the screen, nor can the IDs be settable.
Upgrading firmware by USB
The firmware of the transmitter and receivers can be upgraded using the included
USB cable. Any upgrades and full instructions will be announced on the Phottix blog
(journal.phottix.com).
III. LCD Display
Transmitter
The transmitter has two working modes: TTL/M Mixed Functions and Ratio
Functions. The two different working modes are displayed as following:
TTL/M Mixed Functions Screen（channel 5-32）：
TTL/M Mixed Functions Screen（channel 1-4）: