User Manual

IV. Functions and Operations
To Set the Working Mode
TTL/M Mixed Functions Screen allows you to set to TTL, Manual and OFF for
A/B/C/D/E independently, along with the EV and Power Level for each group.
The Ratio Functions Screen is similar to a original Canon TTL system. You can set
the flash ratio for group A and B from 8:1 to 1:8, and the EV as well.
Pressing the button on transmitter will cycle through TTL/M TTL/M Mixed
Functions and Ratio Functions.
TTL/M Mixed Functions
To set flash mode for each group: Press the group button to choose the group to set,
and then press
button to choose the flash mode from TTL, Manual and OFF.
TTL: Will fire flashes using TTL metering. The EV level of each group can be
adjusted within ±3 stop in 1/3-stop increment.
Manual: Flashes are set in Manual mode and power levels adjusted within
1/1-1/128 in 1/3-stop increment.
OFF: Selecting OFF will turn off the selected group and not fire any remote flashes
in the group.
To adjust the EV Level or Power Level for each group: Press group button to choose
the group to set, turn to set the EV or Power Level for the selected group.