User Manual

3. Slave Group Control

If you need more flash output or wish to perform more sophisticated lighting, you can

increase the number of slave units. Simply set an additional slave unit to the firing

group （A、B or C）whose flash output you want to increase. You can increase the

number of slave units up to 15 units in total.

For example, if you set a firing group with three slave units to A, the three units are

controlled as a single firing group A with a large flash output.

M: Wireless Multiple Flash Shooting with Manual Flash Output

When doing multiple flash shooting with manual flash output, you can shoot with a

different flash output setting for each slave unit (firing group). Set all the parameters

on the master unit.

A:B