User Manual

II. Preparation before use
Installing the batteries
1. Press the battery compartment cover and
slide it down as shown to open the battery
cover. (Picture 1)
2. Insert the batteries as shown. Make sure
the “+” and“-”battery contacts are
correctly oriented as shown. (Note:
Please use 2 pieces of AA alkaline
batteries or AA type NI-MH batteries.
(Picture 2)
3. Replace the battery cover and push back
into the locked position.
（图一）
（图二）
Attaching and Removing the Phottix Laso transmitter
Attaching the Phottix Laso transmitter to the
camera hot shoe
1. Turn off the camera and Phottix Laso
transmitter
2. Align the Phottix Laso transmitter hot
shoe with camera’s hot shoe mount.
3. Slide the Phottix Laso transmitter all
the way into the camera’s hot shoe
mount.
4. Lock the Phottix Laso transmitter by
sliding the mounting foot lock lever to
the right until the lock lever clicks
in place.(See picture 3)
Removing the Phottix Laso Transmitter
1. Lock release: press the lock-release
button while slide the lock lever all the
（图三）
（图四）
1
2