User Manual

8 Defining Setup Options
Defining Setup Options
LIFEPAK 20e Defibrillator/Monitor Operating Instructions 8-9
©2006-2013 Physio-Control, Inc.
PACING SETUP MENU
The Pacing Setup menu allows you to define noninvasive pacemaker settings. When you select
a menu item, the screen displays a help message. The underlined options are factory default
settings.
MONITORING MENU
Use the Monitoring menu to define settings for the ECG and SpO2 monitoring. When you select
a menu item, the screen displays a help message. The underlined options are factory default
settings.
Channels Setup Menu
To define the default set and up to five optional waveform sets for Channels 1 and 2, select an
item from the Channels Setup menu.
Table 8-9 Pacing Setup Menu
Menu Item Help Message Options
RATE
Default pacing rate 40–170, 60 PPM.
CURRENT
Default pacing current 0–200 mA.
MODE
Default pacing mode DEMAND or NON-DEMAND.
INTERNAL
PACER
Detect internal pacemaker and
print arrows
DETECTION OFF or DETECTION ON.
Table 8-10 Monitoring Menu
Menu Item Help Message Options
CHANNELS...
Set up default channel
waveforms
Refer to Table 8-11.
CONTINUOUS ECG
Continuously store ECG
waveform
ON or OFF.
SPO2 TONE
SpO2 pulse tone ON or OFF.
CO2...
Set up CO2 defaults Refer to Table 8-13.
Table 8-11 Channels Setup Menu
Menu Item Help Message Options
Default SET Select default waveform set SET 1, SET 2, SET 3, SET 4, or SET
5
.
SET 1
Select channel waveforms for Set 1 Refer to Table 8-12.
SET 2
Select channel waveforms for Set 2 Refer to Table 8-12.
SET 3
Select channel waveforms for Set 3 Refer to Table 8-12.
SET 4
Select channel waveforms for Set 4 Refer to Table 8-12.
SET 5
Select channel waveforms for Set 5 Refer to Table 8-12.