User Manual

3 Monitoring

Monitoring

LIFEPAK 20e Defibrillator/Monitor Operating Instructions 3-3

You can select or change the ECG size by using the SIZE button or the Speed Dial. If an ECG is

in Channel 2, the size is automatically changed to match the Channel 1 size.

To select or change the ECG size using the Speed Dial:

Adjusting the Systole Tone Volume

To adjust the systole tone volume, highlight and select heart rate (HR) in the monitoring area of

the screen.

The following overlay appears:

To select or change the ECG lead using

the Speed Dial:

1 Highlight and select

CHANNEL 1, and

then select

LEAD to obtain the

primary ECG lead choices.

2 Change the ECG lead by rotating the

Speed Dial. The highlighted selection

shows the ECG lead.

3 Repeat Step 1 and Step 2 to select or

change displayed waveforms for

Channel 2.

To select or change the ECG size using

the

SIZE button:

1 Press the

SIZE button.

2 When the Size menu appears, press

the

SIZE button again. The

highlighted selection shows the

current ECG size.

1 To obtain the primary ECG, highlight

and select

CHANNEL 1, and then

select

SIZE.

2 Change ECG size by rotating the

Speed Dial. The highlighted selection

shows the current ECG size.

1 Rotate the Speed Dial to the desired

volume.

2 Press the home screen to exit.