Datasheet

RB-Pis-14
Bright White and IR Camera Light for Raspberry Pi
The Bright Pi is a breakout/add on board for the Raspberry Pi (can be used with other I2C devices too –
Arduino etc.) which adds both visible bright white light and infrared illumination to the Raspberry Pi,
for use with the Raspberry Pi camera module, the Pi NoIR camera module or for any other project
which requires bright LEDs!
Bright Pi plugs directly into the I2C interface on the Raspberry Pi, and is completely controllable via
the command line, using Python and lots of other programming languages as well. The brightness of
the LEDs is fully controllable using the onboard LED driver chip. The Bright Pi will allow you to
control any ~5v LEDs using the I2C interface on the Raspberry Pi, so you could substitute the provided
LEDs with the colourful LEDs of your choice.
The Bright Pi has M2 mounting holes, just like on the camera module and Pi NoIR and can therefore be
mounted directly to the camera module using the screws and spacers provided. It also has been verified
to work great with the camera mount kit from Pimoroni. The Bright Pi is the perfect accessory for any
project which utilises either the Raspberry Pi camera module or the Pi NoIR but just needs a bit more
light, in a small and lightweight package.
Includes
• One Bright Pi Pcb (With Led Driver Chip Pre-Assembled)
• Four Bright White Leds (High Quality Cree Leds)
• Eight Bright Ir Leds (High Quality Liteon Leds)