Datasheet

Swipe, tap or flick your wrist to control your Raspberry Pi with the Flick Large. Flick Large is a 3D tracking and gesture
breakout board that lets you control the Raspberry Pi computer as if by magic!
Flick uses technology that enables the PCB to detect your gestures from up to 15cm away in 3D space. Draw a circle with your
hand - Flick will track it.
Integrate Flick into your Raspberry Pi project to give you multiple ways of controlling it. Using the near field gesture technology,
you're able to hide your project behind non-conductive material (wood/acrylic) and still use Flick Large (please note however
that mounting it in this way may reduce the sensor range).
Plug and play functionality allows you to get up and running within minutes. Use our software libraries (complete with one line
installer) to fully explore what you can do with Flick. Control your computer, TV, music system and more all with a Flick of the
wrist!
Features:
• Compatible with Raspberry Pi, BeagleBone, Arduino, Genuino or any I2C enabled device
• 3D tracking
• Gesture sensing up to 15cm
• Touch and Tap sensing
• Communicates with the Raspberry Pi via I2C
• Full software libraries (fully open-source code)
• No soldering required
• Dimensions: 14.8 cm x 10.4cm x 0.5cm
• Level shifting chip to enable board to work with 3V3 or 5V0 power and logic
• Orange/green dual colour LED on board
• One line installer
• Fully CE and FCC tested and approved
Compatible
with
Raspberry Pi A+ Raspberry Pi B+
Raspberry Pi 2B Raspberry Pi 3B
Raspberry Pi 3B+ Raspberry Pi Zero
Raspberry Pi Zero W Any other Raspberry Pi with 40 GPIO Pins
ASUS Tinkerboard ASUS Tinkerboard S
Odroid C2
Flick Large - 3D Tracking & Gesture
Description